Mounting Battery Units - Omron ZEN Operation Manual

Mounting Battery Units

5-1 Mounting Battery Units
ZEN-BAT01
Battery Unit
LCD-type CPU Unit
(with LCD and operation buttons)
Mounting Method
1,2,3...
96
Ladder programs and all settings are saved to the CPU Unit EEP-
ROM but calendar, clock, and holding timer bits and holding timer/
counter present values are held by the capacitor. Therefore, if the
power supply is interrupted for an extended time (2 days or more at
),
25°C that data is reset. Mount a Battery Set (optional) for systems
where the power supply may be interrupted for long periods.
1. Tilt the Battery Unit to the side and insert the claw at the bottom
of the Battery Unit into the mounting hole on the left side of the
CPU Unit.
2. Connect the Battery Unit cord to the CPU Unit connector.
3. Push the claw at the top of the Battery Unit into the CPU Unit.
ZEN-BAT01
Battery Unit
LED-type CPU Unit
(with no LCD or operation buttons)
Section 5-1