Displaying Messages (Display Bits (D))
Settings when Character (CHR) Selected
Move the
highlighted cursor
to the display
character string
column.
(
)
(
)
84
ware version 1.10 or later. For details on the CPU Unit version, se-
lect Other/System information. (Refer to page 94.)
ZEN Support Software of Ver. 2.00 or later supports these func-
tions. If ladder programs including these functions are uploaded
using older-version Support Software, they cannot be read cor-
rectly.
Display character string columns (12 characters max.)
Candidates for display character string
Character string cursor position
Position within character string
Character to be selected
Characters before and after character to be selected
Use the Up/Down Buttons to scroll through the
candidate characters.
Alternates display of the candidate character
and the position mark. Candidate is highlighted
and flashing.
Use the Right Button to move the character
string position to the right. Use the Left Button
to move the character string to the left.
Section 3-12
Flash simultaneously
while settings are being
made