The Dns Route Screen - ZyXEL Communications XMG3512-B10A User Manual

The following table describes the labels in this screen.
Table 38 Routing: Add/Edit
L ABEL
Active
Route Name
IP Type
Destination IP
Address
IP Subnet Mask
Use Gateway IP
Address
Gateway IP
Address
Use Interface
OK
Cancel
9.3 T he DNS Ro ute Sc re e n
Use this screen to view and configure DNS routes on the XMG. Click
to open the following screen.
Ro ute
Network Setting > Routing > DNS Route
Fig ure 62
The following table describes the labels in this screen.
Table 39 Network Setting > Routing > DNS Route
L ABEL
Add New DNS
Route
#
Status
Domain Name
WAN Interface
Chapter 9 Routing
DESC RIPT IO N
This field allows you to activate/deactivate this static route.
Select to activate the static route. Select
Ena b le
having to delete the entry.
Enter a descriptive name for the static route.
Select whether your IP type is
Enter the IPv4 or IPv6 network address of the final destination.
If you are using IPv4 and need to specify a route to a single host, use a subnet mask of
255.255.255.255 in the subnet mask field to force the network number to be identical to the host
ID. Enter the IP subnet mask here.
The gateway is a router or switch on the same network segment as the device's LAN or WAN
port. The gateway helps forward packets to their destinations.
If you want to use the gateway IP address, select
Enter the IP address of the gateway.
Select the WAN interface you want to use for this static route.
Click to save your changes.
O K
Click to exit this screen without saving.
C a nc e l
DESC RIPT IO N
Click this to add a new DNS route.
This is the index number of a DNS route.
This field displays whether the DNS route is active or not. A yellow bulb signifies that this DNS route
is active. A gray bulb signifies that this DNS route is not active.
This is the host name or domain name of the DNS route entry.
This is the WAN connection through which the XMG forwards DNS requests for this domain name.
XMG3512-B10A User's Guide
Disa b le
or .
IPv4 IPv6
Ena b le
126
to deactivate this static route without
.
Ne two rk Se tting > Ro uting > DNS