ZyXEL Communications XMG3512-B10A User Manual page 98

Dual-band wireless ac/n vdsl2 bonding gateway with usb
Hide thumbs Also See for XMG3512-B10A:
Table of Contents

Advertisement

The following figure provides an example of a wireless network.
Example of a Wireless Network
Fig ure 43
The wireless network is the part in the blue circle. In this wireless network, devices
point (
) to interact with the other devices (such as the printer) or with the Internet. Your XMG is the AP.
AP
Every wireless network must follow these basic guidelines.
• Every device in the same wireless network must use the same SSID.
The SSID is the name of the wireless network. It stands for Service Set IDentifier.
• If two wireless networks overlap, they should use a different channel.
Like radio stations or television channels, each wireless network uses a specific channel, or frequency,
to send and receive information.
• Every device in the same wireless network must use security compatible with the AP.
Security stops unauthorized devices from using the wireless network. It can also protect the
information that is sent in the wireless network.
Ra dio C ha nne ls
In the radio spectrum, there are certain frequency bands allocated for unlicensed, civilian use. For the
purposes of wireless networking, these bands are divided into numerous channels. This allows a variety of
networks to exist in the same place without interfering with one another. When you create a network,
you must select a channel to use.
Since the available unlicensed spectrum varies from one country to another, the number of available
channels also varies.
Chapter 7 Wireless
XMG3512-B10A User's Guide
98
and
use the access
A
B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents