ZyXEL Communications XMG3512-B10A User Manual page 59

Chapter 5 Network Map and Status Screens
Table 6 Status Screen (continued)
L ABEL DESC RIPT IO N
Secondary DNS This field displays the second DNS server address assigned by the ISP.
server
DHCP This field displays whether the WAN interface is using a DHCP IP address or a static IP address.
Choices are:
C lie nt
No ne
LAN Information
IP Address This is the current IP address of the XMG in the LAN.
IP Subnet Mask This is the current subnet mask in the LAN.
IPv6 Link Local This field displays the current link-local address of the XMG for the LAN interface.
Address
DHCP This field displays what DHCP services the XMG is providing to the LAN. The possible values
are:
Se rve r
LAN.
Re la y
between the remote server and the clients.
Disa b le
MAC Address This shows the LAN Ethernet adapter MAC (Media Access Control) Address of your XMG.
WLAN 2.4GHz/5GHz Information
MAC Address This shows the wireless adapter MAC (Media Access Control) Address of the wireless
interface.
Status This displays whether the WLAN is activated.
SSID This is the descriptive name used to identify the XMG in a wireless LAN.
Channel This is the channel number used by the wireless interface now.
Security This displays the type of security mode the wireless interface is using in the wireless LAN.
802.11 Mode This displays the type of 802.11 mode the wireless interface is using in the wireless LAN.
WPS This displays whether WPS is activated on the wireless interface.
Security
Firewall This displays the firewall's current security level.
System Status
System Up Time This field displays how long the XMG has been running since it last started up. The XMG starts
up when you plug it in, when you restart it (
Current Date/ This field displays the current date and time in the XMG. You can change this in
Time
Ma inte na nc e > T im e Se tting
System Resource
CPU Usage This field displays what percentage of the XMG's processing ability is currently used. When
this percentage is close to 100%, the XMG is running at full load, and the throughput is not
going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using QoS; see
Memory Usage This field displays what percentage of the XMG's memory is currently used. Usually, this
percentage should not increase much. If memory usage does get close to 100%, the XMG is
probably becoming unstable, and you should restart the device. See
234, or turn off the device (unplug the power) for a few seconds.
- The WAN interface can obtain an IP address from a DHCP server.
- The WAN interface is using a static IP address.
- The XMG is a DHCP server in the LAN. It assigns IP addresses to other computers in the
- The XMG acts as a surrogate DHCP server and relays DHCP requests and responses
- The XMG is not providing any DHCP services to the LAN.
.
XMG3512-B10A User's Guide
59
), or when you reset it.
Ma inte na nc e > Re b o o t
Chapter 10 on page
Section 35.2 on page
131).