ZyXEL Communications XMG3512-B10A User Manual page 186

Access Control: Add/Edit
Fig ure 111
The following table describes the labels in this screen.
Table 83 Access Control: Add/Edit
L ABEL DESC RIPT IO N
Filter Name Enter a descriptive name of up to 16 alphanumeric characters, not including spaces,
underscores, and dashes.
You must enter the filter name to add an ACL rule. This field is read-only if you are editing the
ACL rule.
Order Select the order of the ACL rule.
Select Source Select the source device to which the ACL rule applies. If you select
Device the source IP address in the field below.
Source IP Enter the source IP address.
Address
Select Select the destination device to which the ACL rule applies. If you select
Destination enter the destiniation IP address in the field below.
Device
Destination IP Enter the destination IP address.
Address
IP Type Select whether your IP type is
Select Service Select the transport layer protocol that defines your customized port from the drop-down list
box. The specific protocol rule sets you add in the
display in this list.
If you want to configure a customized protocol, select
Protocol This field is displayed only when you select
Choose the IP port (
the drop-down list box.
Chapter 16 Firewall
or .
IPv4 IPv6
, , ,
T C P/ UDP T C P UDP IC MP
XMG3512-B10A User's Guide
186
Spe c ific IP Addre ss
Se c urity > Fire wa ll > Se rvic e > Add
Spe c ific Se rvic e
in
Spe c ific Pro to c o l Se le c t Pro to c o l
, or ) that defines your customized port from
IC MPv6
, enter
,
Spe c ific IP Addre ss
screen
.
.