Table of Contents
Advertisement
4.2. Configuring with EzSetting
Included in the provided CD, the EzSetting (compatible with Windows 2000/ 2003/
2008/ XP/ Vista/ 7) allows you to easily configure your EnviroStation and upgrade
firmware on your SNMP devices. Follow the instructions below:
Step 1
Use the provided standard CAT5 cable to connect the 10/ 100 Base-T
network port from EnviroStation's rear panel to the network.
Step 2
Make sure the workstation and the EnviroStation are on the same LAN.
Step 3
Insert the provided CD in the CD-ROM drive. From the root directory,
launch EzSetting.
Step 4
Click Discover to search all available SNMP devices on the LAN. A list of
devices will be shown.
NOTE:
1. If you want to search SNMP devices in a different domain,
2. If the EnviroStation cannot be found, check UDP port 3456 on
change the Subnet and IPv4 Mask/ IPv6 Prefix Length and
click Discover.
the workstation you are using. Make sure it is open.
Chapter 4 : System Configurations
22
Hide quick links:
Advertisement
Table of Contents
