Chapter 4 : System Configurations; Configuring Via Insight Power Snmp Ipv 6 For Enviro Station Web - Delta EnviroStation EMS2000 User Manual

Chapter 4 : System Configurations

There are different ways you can configure your EnviroStation. If a network conne-
ction is available at your location, the following methods can be used:
 Web-based interface: The InsightPower SNMP IPv6 for EnviroStation Web
offers comprehensive system management and monitoring. Please refer to
Chapter 5: InsightPower SNMP IPv6 for EnviroStation Web.
 EzSetting: Use the provided program EzSetting to quickly set up your SNMP
IPv6. Please refer to 4.2 Configuring with EzSetting.
 Telnet mode: Configure your SNMP IPv6 in text mode. Please refer to 4.3
Configuring via Telnet.
The above-mentioned methods require network connection. If not available, you can
use direct COM port connection to set up your EnviroStation. Please see 4.4
Configuring through COM Port.
NOTE:
1. To ensure system security, it is highly recommended that you change your
account and password after the first login.
2. If you have multiple EnviroStation units installed in your network, we
highly suggest that you change the EnviroStation's default Host Name to
avoid conflicts. Also, it is recommended that you disable BOOTP/ DHCP
and manually assign a valid static IP address to the EnviroStation.
4.1. Configuring via InsightPower SNMP IPv6 for
EnviroStation Web
To set up the EnviroStation via your web browser, please follow the instructions
below:
Step 1 Use a CAT5 network cable to connect the EnviroStation's 10/ 100 Base-T
network port to the network. Launch your web browser. In the address bar,
enter the EnviroStation's default Host Name InsightPower, or default IP
address 192.168.1.100. If you are unable to connect, please see Chapter
7 : Troubleshooting Q6.
Chapter 4 : System Configurations
20