Restoring System Files; Replacing The Spp, Rpp1, And Rpp2 Probes - Siemens ADVIA 2400 Operator's Manual

Restoring system files

1. Insert the CD or the DVD containing the backup files into the CD drive.
NOTES
•
•
2. At the Startup window, select
3. At the ADVIA Backup window, select
source folder that contains the backup files to restore and select
4. At the Restore confirmation window, select
If the disk contains all the backed up files required for the restore procedure, the copy
function begins.
5. If the backed up files are on more than one disk, select
6. At the ADVIA Backup window, select
7. At the ADVIA Backup window, select
8. Reboot the PC.

Replacing the SPP, RPP1, and RPP2 probes

Materials required:
• Probes:
DPP
REF 003975051, PN 073-0223-01
DPP
REF 02030495, PN 073-0611-01
SPP
RPP1,2
• Phillips screwdriver
• Pliers
• Lint-free towels
Time: 10 minutes
Analyzer mode: STANDBY
NOTE:
detection. For dilution probes (DPP) equipped with crash detection, refer to Replacing
DPP probes - with crash detection.
144
When restoring backed-up data files (in the Data subfolder under the A002
folder), select the
Delete Data Files
This deletes any current data files on the PC hard drive before the backed up
system and data files are restored.
If the current data files are needed, perform a backup before restoring previous
files. The restore feature restores all files (system and/or data files) that were
previously backed up. If this is the case, close the ADVIA Backup window and
perform Backing up system files (see above).
(without crash detection),
(with crash detection),
-(REF 03975051, PN 073-0223-01)
-(REF 0551684, PN 073-0224-01)
Use this procedure to replace SPP and RPP probes not equipped with crash
checkbox at the ADVIA Backup window.
.
Back-up
Restore a Backup Copy
.
OK
, select
Exit Restore
.
Cancel
BIOHAZARD
Wear personal protective equipment.
Use universal precautions.
, then browse to the
.
Execute
.
Continue
, then select .
OK
ADVIA 2400 Operator's Guide