As Required Maintenance; Backing Up System Files - Siemens ADVIA 2400 Operator's Manual

As required maintenance

Backing up system files

The system software consists of the operating system, data processing software, and user-
specific system and data files. Back up the system files to a USB Memory Stick or a
formatted CD / CD-RW / DVD disc whenever you make any configuration or parameter
changes. The Restoring System Files procedure follows this procedure.
Materials required:
USB memory stick or CD-RW disc or DVD-RW disc
Time: 10 minutes
Analyzer mode: READY
1. Use an indelible marker to write
label.
2. If the disc is not formatted, format the disk as follows:
3. Place a blank CDRW or a blank DVDRW into the CD/DVD drive.
Select the
corner of the window.
a. On the Drag-to-Disc popup window, right-select the disc.
b. Select
c. Select
d. Select
e. When prompted, select
4. At the Startup window, select
5. At the ADVIA Backup window, select
6. Select the Target Files to be backed up from the following options:
•
•
7. Verify that the backup name is the current date.
NOTE:
format. Accept the destination folder default for the DVD disk drive letter (usually
D:) or select
available, then the backup can be stored on the partitioned storage drive (D:).
8. Select
9. At the Backup window, select
NOTE:
10. When the file copy completes, at the Backup window, select
Maintenance
icon located to the left of the time display in the lower right
Drag-to-Disc
.
Format disc
.
Full format
.
OK
- Approximately 30 MB of disk space is required.
System Files
- Disk space required is dependent on the amount of data stored on
Data Files
the C:/ drive. A new CD holds approximately 650 MB.
The system names the backup automatically, which consists of a yyyymmdd
to choose a different destination. If a recordable disk is not
Browse
.
Execute
If an error window displays, reformat the disk and try again.
with the current date on a disc
System back up
.
Yes
.
Back-up
Make a Backup Copy
to confirm the copy.
OK
.
.
OK
143