Programming - Siemens SITRANS L LU240 Compact Operating Instructions

Note
Items numbers may not appear sequentially
Although item numbers are sequential, they may not appear so as some menus and
parameters are only visible on the device based on configuration settings.
7.2.6

Programming

From measurement view, press
level M 01.
To select a listed option:
1. Navigate to the desired parameter.
2. Press
3. Scroll to a new selection using
4. Press
selection.
To change a numeric value:
1. Navigate to the desired parameter.
2. When selected, the current value is displayed.
3. Press
4. Use
scrolling speed.
5. To escape without saving your changes, press
6. Press
symbol is no longer flashing) and shows the new selection. Review for accuracy.
Button functions for editing
Button
SITRANS Probe LU240 with mA/HART
Compact Operating Instructions, 10/2018, A5E42673704-AB
button to open edit view. The current selection is highlighted.
button to accept it. The display returns to parameter view and shows the new
button to configure it. The "EDIT" symbol is flashing.
and buttons to increase or decrease the value. Press and hold button to increase
button to accept the new value. The display returns to parameter view ("EDIT"
Name
UP or DOWN Selecting parameter set‐
arrow tings
Alpha-numeric editing
RIGHT arrow Selecting parameters
LEFT arrow Selecting parameter set‐
tings
button to enter parameter view and open the first menu
and buttons.
button to return to parameter view.
Function
Scrolls to item
Increases or decreases value. Pressing and
holding will increase scrolling speed through
values.
Accepts the data (writes the parameter setting)
Cancels edit view without changing the param‐
eter setting.
Commissioning
7.2 Local commissioning
33