Siemens SITRANS L LU240 Compact Operating Instructions page 36

Commissioning
7.2 Local commissioning
Note
Distance and Custom applications
● When "Operation" is set to "Distance", setting the upper calibration point is not required
(will not appear in the wizard).
● Only when "Operation" is set to "Custom", is the upper range value required (will appear
in the wizard).
Note
Output remains active
While the device is being configured, the output remains active and continues to respond to
changes in the device.
Note
Parameter options
In the following wizard steps, a full list of options for each parameter is shown. However, some
options may not appear on the device, based on the application selected.
Operation
Sets operation mode which defines output and local display.
Setting
Default
Note
Completing a Custom setup
For a custom application ("Operation" set to "Custom"), at least one pair of input and output
breakpoints (parameters "X-value" and "Y-value") must be defined
Refer to full operating instructions: In Parameter assignment - Local chapter, see menu Setup >
Custom > Customized characteristic curve.
36
Level
Space
Distance
Volume
Volume flow
Custom
Level
LEVEL
SPACE
DIST
VOL
VFLOW
CUSTM
LEVEL
after the wizard is complete.
SITRANS Probe LU240 with mA/HART
Compact Operating Instructions, 10/2018, A5E42673704-AB