Siemens SITRANS L LU240 Compact Operating Instructions page 31

Measurement view shows the current measured values of the device as well as status and
diagnostic messages.
①
②
③
④
⑤
Parameter view shows the parameters, parameter values and the wizards of the device.
①
②
③
④
Edit view
Change parameter values in this view. Wizards are available for specific parameters.
①
②
③
④
⑤
SITRANS Probe LU240 with mA/HART
Compact Operating Instructions, 10/2018, A5E42673704-AB
Process value name
Process value unit
① ②
( and alternate on display)
Process value measurement
If the process value is too large to be shown on the display (value has more than 5 digits), hashes
"#####" will be shown instead.
Process value number
Diagnostic symbol
Parameter name
Parameter value
Parameter number
"EDIT" symbol (permanently enabled)
Parameter name
①
Process value unit ( and
Scrolling arrows (within options list only)
Parameter number
"EDIT" symbol (flashing)
②
alternate on display)
Commissioning
7.2 Local commissioning
31