Web Viewer-Password Setup - Samsung SNP-6321H Network Setup Manual

WEB VIEWER-PASSWORD SETUP

User
1. From the Setup menu, select the <System (
2. Click <User>.
3. Provide the necessary user information.
• Administrator password change :
Change the password for the administrator.

J
For the security purposes, you are recommended to use a
combination of numbers, alphabets uppercase and
lowercase and special characters for your password.

It is recommended to change your password once every
three months.

The password length and limits are shown as follows.
- A combination of at least three types of upper case, lower
case, numeric, and special characters: 8 to 9 characters.
- A combination of at least two types of upper case, lower
case, numeric, and special characters: 10 to 15 characters.
- Should be different from the ID.
- For higher security, you are not recommended to repeat the same characters or consecutive keyboard inputs for your
passwords.
- Special characters that are allowed. : ~`!@#$%^*()_-+=|{}[].?/
- When you access the camera web page for the first time or access it after the initialization, you will be moved to the
admin password setting menu.
- In this menu, you need to login again with the new password before using the camera web page menus.
- If the existing password is not matched, when you change the admin password, you cannot change the password.
- After changing your password, if there is a camera connected to a CMS or NVR client, then you need to re-register it
with the newly changed password. If the camera is still connected with the same password, then the account may be
locked because a client uses the previous password.

If you try to login with the registered account, 5 or more consecutive password authentication has failed, and then
the account may be locked for thirty seconds.

When the password is changed while multiple connections are active from a PC, the browser may malfunction. In
that case, reconnect to the server.
)> tab.
English _47