Samsung SNP-6321H Network Setup Manual page 31

Accessing the network camera connected to the local network.
Since using the IP Installer on a remote computer that is not in the Broadband Router's network cluster is not
allowed, users can access cameras within a Broadband Router's network by using the camera's DDNS URL.
1. Before you can access a camera in the Broadband Router network, you should have set the port range
forward for the Broadband Router.
2. Launch an Internet browser on an external remote monitoring PC.
3. Type a DDNS URL address (http://www.samsungipolis.com/Product ID) in the address bar to connect to
the camera.
4. Enter the <User name> and <Password> to login when the login window appears.
Password setting
When you access the product for the first time, you must
register the login password.
When the "Password change" window appears, enter the new
password.

J
For a new password with 8 to 9 digits, you must use at least 3
of the following: uppercase/lowercase letters, numbers and
special characters. For a password with 10 to 15 digits, you
must use at least 2 types of those mentioned.
- Special characters that are allowed. : ~`!@#$%^*()_-+=|{}[].?/

For higher security, you are not recommended to repeat the
same characters or consecutive keyboard inputs for your passwords.

If you lost your password, you can press the [RESET] button to initialize the product. So, don't lose your password by
using a memo pad or memorizing it.
Login
Whenever you access the camera, the login window appears.
Enter the User ID and password to access the camera.
1. Enter "admin" in the <User name> input box.
The administrator ID, "admin", is fixed and can not be
changed.
2. Enter the password in the <Password> input field.
3. Click [OK].
If you have logged in successfully, you will the Live Viewer
screen.
English _31