Launching Ip Installer - Samsung SNP-6321H Network Setup Manual

network configuration
How to configure the network environment of the PC used for IP
configuration
1. Open the network environment configuration menu of the
PC connected to the router.
2. Path : Control panel  Network and Sharing Center 
Change adapter settings  Local Area Connection 
Properties  Internet Protocol Version (TCP/IPv4)  Properties
3. Select "Obtain an IP address automatically" and "Obtain
DNS server address automatically."
M 
If the IP range of the PC used for IP configuration is different
from that of the network camera, the camera will not be
detected, even if you click [Search].

LAUNCHING IP INSTALLER

What is IP Installer?
The IP Installer, launched on the PC for IP configuration, receives MAC address information transmitted from the
network devices with the IP range of the router, and detects network cameras.
If the IP configuring PC (on which the IP Installer is installed) and the network camera are connected to different
routers and their IP ranges are different, the IP Installer cannot detect network cameras.
EX1) In the following network structure, a MAC address of the network camera is not transmitted to outside
router (2), and a network camera is not detected on the IP Installer of the local PC.
IP Installer of PC for
IP configuration
EX2) The IP configuring PC, on which the IP Installer is installed, must be located in the same IP range of the
router with the network camera in order to detect network cameras.
IP Installer of PC for
IP configuration
12_ network configuration
Router(1)
Router(2)
Network camera 1
Router(1)
Network camera 1
Router(2)
...
Network camera n
...
Network camera n