Samsung SNP-6321H Network Setup Manual page 40

setup screen
DDNS
DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a
general Host Name so that the user can easily remember it.

J
You can use the DDNS service only if the internet is connected.
1. From the Setup menu, select the <Network (
2. Click <DDNS>.
3. Select the <DDNS> connection type.
4. Type in the DDNS items according to the selected type.
• Samsung DDNS : Select this if you use the DDNS server
provided by Samsung Techwin.
- Product ID : Enter the product ID that is registered with
the Samsung DDNS service.
- Quick connect : It sets port forwarding automatically
when used with a UPnP (Universal Plug and Play) supporting router.
M 
If you want to use the DDNS service without using a hub that supports the UPnP function, click Quick connect,
then go to the hub menu and activate port forwarding for your hub.
For more on how to set port forwarding for your hub, refer to "How to configure port forwarding". (page 23)
• Public DDNS : Select one of provided public DDNS servers when you use a public DDNS server.
- Service : Select desired public DDNS service server.
- Host name : Enter the name of the host that is registered with the DDNS server.
- User name : Enter the user name for the DDNS service.
- Password : Enter the password for the DDNS service.
5. When done, click [Apply (

J
If selected <Quick connect>, be sure to select Samsung DDNS service.
To connect to the Samsung DDNS in camera setup
1. From the DDNS setup page, set <DDNS> to <Samsung
DDNS>.
2. Provide the <Product ID> that you registered product ID
with the DDNS site.
3. Click [Apply (
When the connection is successfully made, you will see the
message of <(Success)> on the screen.
40_ setup screen
)].
)].
)> tab.