Samsung SNP-6321H Network Setup Manual page 41

Configuring public DDNS in Camera Settings
1. Open the DDNS settings page and select <Public DDNS> for <DDNS>.
2. Enter the corresponding site's host name, user name and password.
3. Click [Apply ( )] button.
If the connection properly establishes, <(Success)> appears.
4. When done, click [Apply (
M 
To use DDNS service properly, both DDNS setup and the router's port forwarding setup are required.
For port forwarding setup, refer to "How to configure port forwarding". (page 23)
IP filtering
You can create a list of IPs that you want to grant or deny access to them.
1. From the Setup menu, select the <Network (
2. Click <IP filtering>.
3. Select <Filtering type>.
• Deny : If selecting this, access from those IPs that are
added to the filtering will be restricted.
• Allow : If selecting this, access from only those IPs that are
added to the filtering will be accepted.
4. Click the [Add ( )] button.
The IP list will be created.
5. Provide the IP that you want to grant or deny access from.
When you enter an IP address and a Prefix, the list of IP addresses available will appear in the right-side filter
range column.
M 
If selected <Allow> for IP Filtering and <IPv6 setup> of <Interface> is set to <Use>, both IPv4 and IPv6 addresses
of the computer currently configuring should be assigned.

The IP address of the computer used for the current setup cannot be added to <Deny>, it should be added to
<Allow>.

Only the IP addresses that are set to <Use> will be displayed in the filter column.
6. Select an IP to delete from the list.
Click the [Delete (
7. When done, click [Apply (
)].
)> tab.
)] button.
)].
English _41