Samsung SNP-6321H Network Setup Manual page 39

Port
1. From the Setup menu, select the <Network (
2. Click <Port>.
3. Type in each item in the Port menu as necessary.

When setting your ports, you cannot use port numbers such as
0~1023, 3702 or 49152.
• HTTP port : HTTP port used to access the camera via the
web browser.
The default is 80(TCP).

Setting the HTTP port for Safari and Google Chrome browsers to
65535 is not allowed by security policy.
• HTTPS port : In this version, the security of the web communication protocol HTTP is strengthened. It can
be used when you set HTTPS mode in SSL.
The initial value is set to 443(TCP).

The available setting range is 1024~65535. (For security reasons, in your Safari or Google Chrome browser, you may
not use 65535 as your HTTPS port.)
• Device port : Set a port used to transfer video signals with the Samsung protocols.
• RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
• Web streaming port : Used to transfer videos to the Web Viewer; the default is 4520.
• Silverlight policy port : Silverlight is used to permit to acquire a network connection; the default is 943.
M 
If changed the HTTP port, the browser exits.
Afterwards, address should contain the newly assigned HTTP port trailing the IP.
ex) IP address: 192.168.1.100, HTTP port : Assigned 8080  http://192.168.1.100:8080
(If HTTP port is set to 80, no need to specify the port number)

The port range of the Web Streaming is between 4502 and 4534. If the Device port is with this effective range, the
Web Streaming port should be specified the same as the Device port.

You cannot change the Web Streaming/Silverlight policy server port of a camera.

Using RTSP and HTTPS is recommended in order to prevent the image information from being restored.
4. When done, click [Apply (
)> tab.
)].
English _39