Schwinn 411 Service Manual page 41

17. Carefully turn the Right Crank Arm and check the movement of the
Drive Belt. The Crank Arms and Flywheel should move as one.
Be sure to keep fingers clear of all pinch hazards when you
!
turn the Right Crank Arm.
Adjust the belt tension again if necessary.
18. Re-assemble the machine in the reverse order of when the parts
were removed.
19. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
41