Moving The Machine; Leveling The Machine - Schwinn 411 Service Manual

Moving the Machine

The machine may be moved by one or more persons
depending on their physical abilities and capacities.
Make sure that you and others are all physically fit and
able to move the machine safely.
1. Remove the AC Adapter.
2. Use the Transport Handle to carefully lift the machine onto
the transport rollers.
3. Push the machine into position.
4. Carefully lower the machine into position.
NOTICE: Be careful when you move the elliptical. Abrupt motions
can affect the computer operation.

Leveling the Machine

The machine needs to be leveled if your workout area is uneven or if the Rail Assembly is slightly off the floor. To adjust:
1. Place the machine in your workout area.
2. Safely stand on the back of the Rail Assembly for
approximately 20 seconds.
3. Step off the machine.
4. Loosen the locking nuts and adjust the levelers until
they all contact the floor.
Do not adjust the levelers to such a height that
they detach or unscrew from the machine. Injury
to you or damage to the machine can occur.
5. Adjust until the machine is level. Tighten the locking
nuts.
Make sure the machine is level and stable before you
exercise.
5