Schwinn 411 Service Manual page 19

1. Turn the power on to the machine.
2. Set the resistance level to the maximum setting on the Console.
3. Unplug the AC Adapter from the wall outlet and machine.
4. Using a standard screwdriver on the small slots along the edge of the
Center Engine
Center Engine Shroud, gently pop it off from the Frame Assembly.
Shroud
Right Upper Engine
5. Using a #2 Phillips screwdriver, remove the indicated screws (by ovals)
Shroud
from the Right Upper Engine Shroud.
Note: To assist with re-assembly, the double oval is a self-tapping screw.
Lower Engine Shroud,
Right
19