Figure 2-107 Cabling For Wall-Mount; Figure 2-108 Wall-Mount Screw Guide; Figure 2-109 Mounting The Dss; Wall-Mounting The Dss Console - NEC SL2100 Hardware Manual

SL2100

5.3.2 Wall-Mounting the DSS Console

1. Lift the leg and lead the cable through the applicable grooves. Refer to
Wall-Mount on page
2. Install two screws into a wall. The screw heads must be remained about 3 mm (0.12").
83.5 mm
(3.287")
3. Mount the DSS Console to the wall.
Wall-mounting
holes
2-78
2-78. Lower leg to stowed position.
Leg

Figure 2-107 Cabling for Wall-Mount

Figure 2-108 Wall-Mount Screw Guide

Figure 2-109 Mounting the DSS

Figure 2-107 Cabling for
< Bottom view>
3 - 4 mm 1 - 3 mm
(0.12" - 0.16") (0.04" - 0.12")
7 - 9.5 mm
(0.28" - 0.37")
Minimum 10 mm (0.39")
ISSUE 1.0
Wall side
Installation