S
4
W
ECTION
ALL
4.1
3-38
M
C
OUNTING THE
Wall Mounting the 19" (CHS2UG) Chassis
When wall mounting the chassis, ensure the wall can support the weight of the
chassis (55 lbs per system chassis – including blades, cords, power supply, etc.).
The chassis is secured to the wall with a wall mount bracket. Ensure that enough
space is available to allow the installation of additional expansion chassis.
4.1.1
CHS2UG Chassis Wall Mount Installation
TIP
1.
Use the template shown in
(19" Chassis) on page 3-39
HASSIS
Plywood should first be installed on the wall where the
❍
chassis will be positioned. This allows secure
anchoring of the screws which support the weight of
the chassis.
Due to chassis weight, NEC recommends only a single
❍
CHS2UG chassis per wall mount.
Figure 3-46 Wall Mount Spacing Guide
for required spacing before drilling.
Issue 2.0
Installing the SV9100 Chassis