Figure 2-23 System Expansion Cabling; Chassis Inter-Connection - NEC SL2100 Hardware Manual

SL2100

1.7.4 Chassis Inter-connection

1. Connect the Main Chassis and Expansion Chassis using the NEC provided CAT5 straight-through
cable, attached to the EXIFE-C1 board.
Attach one end to each Expansion Chassis EXT connector on the EXIFE board (see
Figure 2-23 System Expansion Cabling on page
EXP2 connector on the EXIFB of the Main Chassis.
Expansion Chassis 2
Main Chassis
Expansion Chassis 1
1.8 Grounding and AC Cabling
The ETH (Earth Ground Lug) is located near the AC power inlet on each Chassis.
2-18
2-18). Attach the opposite end to the EXP1,

Figure 2-23 System Expansion Cabling

EXIFE-C1 board
< Side view >
CPU board EXIFB-C1 board
EXP 2
EXP 1
< Side view >
EXIFE-C1 board
< Side view >
ISSUE 1.0
Installation