SL2100
4.
Install the VOIPDB-C1 board to J2 connector on the CPU board, and tighten the four screws.
Be careful not to damage the components on the CPU board when
installing.
VOIPDB-C1 board
When the VOIPDB-C1 and EXIFB-C1 are mounted on the CPU board, refer to the following
installation as
Be careful not to damage the components on the CPU board and EXIFB
daughter board when installing.
2-62
Figure 2-79 Installing the VOIPDB-C1 Board
Figure 2-80 Installing the VOIPDB-C1 and EXIFB-C1 on page
Screws
ISSUE 1.0
J1
J2
CPU board
Screws
2-63.
Installation