Figure 2-96 Ip Multiline Telephone Connection; Figure 2-97 Ip Multiline Telephone Connectors; System Connection - NEC SL2100 Hardware Manual

ISSUE 1.0

5.2.2 System Connection

The IP Multiline Telephone is connected via PoE SWITCH.
Chassis
5.2.3 Connectiong the IP Multiline Telephone
1. Connect the LAN Network 10Base-T/100Base-TX cable to the LAN(=) connector.
2. Power Feeding is used by PoE, and AC/DC Adapter is not used.
3. The IP Multiline Telephone has a Switching HUB to connect a PC to the LAN Network. Connect
the 10Base-T/100Base-TX straight cable used for connection to the PC to the PC(X) connector
and to the PC.
5.2.4 Applying Power to the IP Multiline Telephone
IP Multiline Telephone (IP7[ ]-8IPLD-C1) supports PoE power source for the Telephone.
Hardware Manual
VOIPDB-C1
board
LAN Cable
(10BASE-T/100BASE-TX)
PoE Switch
Commercial Power

Figure 2-96 IP Multiline Telephone Connection

HEADSET
LAN(=) PC(X)
HANDSET
HAC
< Bottom view>

Figure 2-97 IP Multiline Telephone Connectors

IP Multiline Telephone
Exit
LAN (=) Connector
PC (X) Connector
LAN(=) PC(X)
SL2100
Scroll
Help
ABC DEF
Flash Transfer
1 2 3
GHI JKL MNO
Mute DND
4 5 6
PQRS TUV WXYZ Clear/Back Menu
7 8 9
0 #
Speaker Hold
PC
2-73