SL2100
Expansion Chassis 1
Figure 2-14 Horizontal Arrangement of Chassis and Battery Boxes
1.6 Rack Mounting the Chassis
Main or Expansion chassis can be put into 19 inch rack using a shelf plate one by one refer to
Figure 2-15 Rack Mounted Chassis on page
If the system required two or three chassis simultaneously put on the shelf plate of 19 inch rack, the
space must be required between chassis for heat ventilation.
Do not stack two or three chassis per one shelf plate.
1.7 Installing the Expansion Chassis
1.7.1 General
Each Expansion Chassis is connected to the Main Chassis individually. The EXIFB-C1 board must be
installed on the CPU board in the Main Chassis. And the EXIFE-C1 board must be installed on the
Each Expansion Chassis.
2-12
Main Chassis
Minimum
300 mm
(11.81")
2-12.
44.5 mm (1.75")
Figure 2-15 Rack Mounted Chassis
Expansion Chassis 2
Minimum
300 mm
(11.81")
Shelf Plate
ISSUE 1.0
Minimum
300 mm
(11.81")
Installation