Fans - HP OMEN 15-ce100 Maintenance And Service Manual

Fans

NOTE: The left and right fans are spared in a single kit.
Description
Fan kit
IMPORTANT:
and replacement
Before removing the fans, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Solid state drive (see
b. Hinge covers (see
c. System support brackets (see
Remove the fans:
1. Disconnect the fan cables from the system board (1).
2. Remove the fan cables from the routing path clips (2).
3. Remove the two Phillips PM2.0×5.7 screws (3) securing the fans to the computer.
Make special note of each screw and screw lock size and location during removal
Battery on page
Solid state drive on page
Hinge covers on page
36), and then remove the following components:
33).
45).
System support brackets on page
Spare part number
L22261-001
46).
Component replacement procedures 49