Table of Contents
Advertisement
4.
Remove the heat sink (4).
5.
Thoroughly clean the thermal paste from the surfaces of the heat sink and the system board
components each time the heat sink is removed. Replacement thermal material is included with the
heat sink and system board spare part kits. The following illustration shows the replacement thermal
material locations.
Be sure that thermal paste (1) and thermal pads (2) are installed on the heat sink on shown in the
following illustration.
To install the heat sink, reverse this procedure.
Fans
To remove the fans, use this procedure and illustration.
Table 6-9
Fan descriptions and part numbers
Description
Fan kit for use in models with 3050, 3050Ti graphics (includes both fans)
Fan kit for use in models with 6650M, 3060, 3070 graphics (includes both fans)
Before removing the fans, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page
Spare part number
N14086-001
N14087-001
36).
Fans
47
Advertisement
Table of Contents
