HP OMEN 15-ce100 Maintenance And Service Manual page 75

Before removing the display bezel, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Hinge covers (see
b. System support brackets (see
c. Fans (see Fans on page
d. Heat sink (see
e. System board (see
f. Display assembly (see
Battery on page 36), and then remove the following components:
Hinge covers on page
System support brackets on page
49).
Heat sink on page 53).
System board on page
Display assembly on page
45).
58).
61).
Component replacement procedures
46).
65