Webcam - HP OMEN 15-ce100 Maintenance And Service Manual

Webcam

NOTE: The webcam spare part kit includes does not include the webcam cable.
Description
Webcam
Webcam and display cable
IMPORTANT:
and replacement
Before removing the webcam, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Hinge covers (see
b. System support brackets (see
c. Heat sink (see
d. System board (see
e. Display assembly (see
f. Display bezel (see
Remove the webcam:
1. Disconnect the webcam cable from the webcam board (1).
70 Chapter 6 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Battery on page
Hinge covers on page
Heat sink on page
System board on page
Display assembly on page
Display bezel on page
36), and then remove the following components:
45).
System support brackets on page
53).
58).
61).
66).
Spare part number
919573-009
929451-001
46).