Solid State Drive - HP OMEN 15-ce100 Maintenance And Service Manual

Solid state drive

Description
256 GB
128 GB
IMPORTANT:
and replacement
Before removing the solid state drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the solid state drive:
1. Remove the Phillips screw (1).
2. Remove the solid state drive at an angle (2).
Reverse this procedure to install the solid state drive.
Make special note of each screw and screw lock size and location during removal
Battery on page 36).
Component replacement procedures
Spare part number
847109-023
912322-006
33