USB board
NOTE:
The USB board spare part kit does not include the connector cable.
Description
USB board (for use only on computer models equipped with an Nvidia N17E GPU)
USB board (for use only on computer models equipped with an Nvidia N17P GPU)
USB board connector cable
IMPORTANT:
and replacement
Before removing the USB board, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Hinge covers (see
b.
System support brackets (see
c.
Fans (see
Remove the USB board:
1.
Disconnect the USB board connector cable from the USB board (1).
2.
Remove the Phillips PM2.0×5.7 screw (2).
Make special note of each screw and screw lock size and location during removal
Battery on page
Hinge covers on page
Fans on page
49).
36), and then remove the following components:
45).
System support brackets on page
Spare part number
L17321-001
L17322-001
929447-001
46).
Component replacement procedures
51