Back Cover - HP OMEN 15-ce100 Maintenance And Service Manual

Back cover

Description
Back cover
IMPORTANT:
and replacement
To remove the back cover, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Hinge covers (see
b. System support brackets (see
c. Heat sink (see
d. System board (see
e. Display assembly (see
f. Display bezel (see
g. Webcam (see
h. Display panel (see
i. Display cable and webcam cable (see
j. WLAN antennas (see
k. Display hinges (see
Make special note of each screw and screw lock size and location during removal
Battery on page
Hinge covers on page
Heat sink on page
System board on page
Display assembly on page
Display bezel on page
Webcam on page
Display panel on page
Display panel on page
Display hinges on page
36), and then remove the following components:
45).
System support brackets on page
53).
58).
61).
66).
70).
72).
Display cable and webcam cable on page
72).
68).
Spare part number
929442-001
46).
75).
Component replacement procedures 79