Condensate Pipe And Traps - Biasi Riva Advance Combi Installation & Operation Instructions

15. Commissioning Cont.
time.
• Reassemble the front panel of the case.
•
• Unscrew the condensing heat exchanger
air purger valve 1 (Fig. 15.2).
1
Figure 15.2

15.3 Condensate pipe and traps:

The full length of the condensate pipe should
be check for leaks.
Before running the boiler, ensure that the
built in condensate trap and any other
with water.
RIVA ADVANCE COMBI MANUAL
Fill the built in condensate trap by
pouring a cupful of water into the
Figure 15.3
An alternative, to avoid the removal of the
sampling point (Figure 15.4).
Figure 15.4
Sampling points
Flue exhaust
44