12. Electrical Connections/Wiring Cont.
The path of the external probe wires or
cable must follow the indicated path and be
fastened as shown in Figure 12.13.
12.8 Remote control electric connection (optional):
Unscrew the screws and remove the terminal
board cover (Figure 12.11).
See also the REMOTE CONTROL manual to
connect the remote control to the boiler.
Connect the two electric wires to terminals
A and B on the terminal board as shown in
Figure 12.14.
The electric bridge connected in the
room thermostat terminal board between
terminals "1 and 3" must not be removed
Figure 12.15.
RIVA ADVANCE COMBI MANUAL
Figure 12.13
TO THE REMOTE
Remote
connection
terminal board
Figure 12.14
L
N
Electric power
supply terminal
board
3
1
Room
thermostat
terminal board
Figure 12.15
34