Exchanging the Sensors
When required
Preparations for this
procedure
Parts required
1 Unscrew the six holding screws on top of the hardfoam
encapsulation.
1100 Series AT Reference Manual
Sensors defective
Removing the Top Cover and Foam (see
on page 63).
Sensor flexboard, PN G1330-66504
Heatsink Compound, PN 6040-0454
2 Carefully lift the upper part of hardfoam encapsulation
away.
Screws
Repairing the ALS Thermostat Module
"Removing the Top Cover and Foam"
4
69