Stage 5: Installing Tray Cover And Front Cover - Agilent Technologies 1100 Series Reference Manual

Stage 5: Installing Tray Cover and Front Cover

1 Fix the tray cover in the clips of the left autosampler cover side by sliding it
2 Position the front cover in the top left corner of the autosampler and turn it
3 Close the tray cover.
Tray cover
Autosampler front door
Figure 17
1100 Series AT Reference Manual
in position. Do not close the tray cover.
towards the instrument. Press the stop fastener to secure it in the right side
cover of the autosampler.
Installation of Tray Cover and Front Cover of the Autosampler
Installing the G1330B Thermostat
2
39