Exchanging Heat Exchanger Fan - Agilent Technologies 1100 Series Reference Manual

Autosampler thermostat

Hide thumbs Also See for 1100 Series:

Table of Contents

Exchanging Heat Exchanger Fan

When required

Preparations for this

procedure

Parts required

1 Unplug the connector at the TCA board and remove the

wire from the Top Foam.

3 Remove the Fan from the Fan Gasket.

1100 Series AT Reference Manual

When defective

Removing the Top Cover and Foam (see

on page 63) item 1 to 4.

Fan, PN 3160-1079

2 Carefully lift the Fan upwards.

4 Insert the new Fan in the Fan Gasket. See arrow at the side

of Fan for correct airflow direction.

Repairing the ALS Thermostat Module

"Removing the Top Cover and Foam"

Table of Contents