Table of Contents
Advertisement
SECTION 7: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Schedule
Check for the following conditions before
each use:
•
Loose mounting bolts.
•
Damaged saw blade.
•
Worn or damaged wires.
•
Leaking or broken lube lines.
•
Empty lube reservoir.
•
Any other condition that could hamper the
safe operation of this machine.
Monthly:
•
Grease Fittings
•
V-belts
After the first 100 hours:
•
Gear Box
Every 2500 Hours:
•
Gear Box
-28-
Grease Fittings
Lubricate the four grease fittings (Figure 32) with
a general purpose grease after every month (160
Hours) of regular use.
Grease Fittings
(2 of 4)
Figure 32. Grease fittings (Additional 2 fittings
are on opposite side of head casting).
Gear Box
The oil inside the gear reducer should be replaced
after the first month (160 hours) of regular use.
We recommend 90 Wt. gear oil.
After the first oil change, the oil inside the gear
reducer should be replaced after every 2500
hours of use. We recommend 90 Wt. gear oil.
Model G0524 (Mfd. Since 7/16)
Advertisement
Table of Contents
