Online; Setting The Target Mes Interface Module - Mitsubishi Electric Melsec Q Series User Manual

7
MES INTERFACE FUNCTION CONFIGURATION TOOL

7.12 Online

Online operations can be performed to the MES interface module connected to the
network.

7.12.1 Setting the target MES interface module

Set the target MES interface module.
Specify the IP address, user name and password that were set in [System setting].
7
- 124 7.12 Online
7.12.1 Setting the target MES interface module
Section 7.6 System Setting
1 Select [Online] [Transfer setup] from the menu.
2 The [Transfer setup] dialog box is displayed.
Set the following items and click the
Table 7.84 Setting items in the [Transfer setup] dialog box
Item
IP address
User name
Password
Connection test
OK button.
Figure 7.95 [Transfer setup] dialog box
Specify the IP address of the MES interface module in decimal notation.
(Example) 192.168.3.3
Specify a user name. (1 to 20 characters)
Case-sensitive.
(Example) QJ71MES96
Specify a password. (8 to 14 characters)
Case-sensitive.
(Example) MITSUBISHI
Checks if the device of the specified IP address is connectable to the MES
interface module.
Description