Online Change - Mitsubishi Electric MELSEC iQ-F Series Training Manual

4.
The device after change is displayed!

Online Change

This section describes how to change a program while the CPU module is in the RUN state.
This function allows users to write a program even while the CPU module is in the RUN state.
Precautions
Online change cannot be executed when the program in the CPU module and the program before the modification in GX
Works3 do not match. Thus, when whether the programs match or not is unclear, verify them before the modification with GX
Works3, and execute the online change.
(From the previous page)
2.
Click!
3.
Click!
4.
The ladder program after the modification is
displayed.
To change only the device number, click the
F2 key.
1.
Change the ladder.
2.
After the change, click [Convert] → [Online Program
Change] from the menu.
Or, press  + .
3.
The message "CAUTION" appears. Click the [Yes]
button to accept the change.
4.
Online change is completed.
35