Mitsubishi Electric Melsec Q Series User Manual page 202

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7
- 44 7.8 Device Tag Setting
7.8.2 Setting items in Array setting
(b) Block
Devices of all tag components are arranged as a block.
The size of the block can be changed in [array block size].
For [array block size], refer to the following.
Section 7.8.3 Setting items in Component setting
Usually, the block size need not be changed because it is automatically adjusted
to avoid device duplication.
(Example) When [Length of array] is set to 4 with [block] setting
Only the start device (device in n=1) need be set.
Devices in and after n=2 are configured automatically.
Figure 7.34 When [block] is selected
When device types are different, [block] cannot be selected.
n=1
D0
Component_A
D1 to D2 D9 to D10
Component_B
Component_C D3 to D7 D11 to D15
Block
n=2
n=3
n=4
D8 D16
D24
D17 to D18
D25 to D26
D19 to D23 D27 to D31