7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.13.7 Checking the operation status of the trigger buffering
The current and past maximum values of No. of trigger buffering data can be viewed.
7.13.8 Formatting the CompactFlash card
Format the CompactFlash card installed in the MES interface module.
7
- 144
7.13 Online - Remote operation
7.13.7 Checking the operation status of the trigger buffering
Table 7.98 Item displayed in [Trigger buffering status]
Display
*1
No. of bufferings
*1
The space is displayed as blank during data acquisition or in the case of failure of data acquisition.
When the number of buffering data is large, check the number of jobs and the
trigger condition setting.
1
1
Check the [Format] box and click the
2
Executing the formatting deletes all of the CompactFlash card data.
When the CompactFlash card is formatted after the system operation, the MES
interface function settings are cleared.
Read out the MES interface function settings to MES Interface Function
Configuration Tool before formatting the card.
Section 7.12.3 Reading the MES interface function settings
Figure 7.112 [Trigger buffering status]
Now
Displays the current number of
buffering data (buffered jobs).
Figure 7.113 [CompactFlash card operation]
Execute
Description
Maximum
Displays a past maximum value in the
number of buffering data (buffered
jobs).
button.