Online Mode; Online Change Mode - Mitsubishi Electric FX Series Training Manual

Online Mode

9 Online Mode
There are two methods for evoking online editing; via the online menu or the toolbar icon. Use
Save as in the Project menu to create a copy of the current project. Rename the Copy to
"Motor_Control_Mod". The following operations will apply to this modified program.
Rebuild the project and download it to the PLC.

Online Change Mode

9.1
Open the body of the 'MOTOR_CONTROL' POU and select Online change mode :
Add an additional network as shown below:
Training Manual GX IEC Developer
Online Change Mode
9 - 1