Mitsubishi Electric Melsec Q Series User Manual page 213

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(1) Server service name (Up to 16 characters)
Enter a server service name.
The set server service name is used in [Job settings].
For characters that can be used for server service names, refer to the following:
variable names, etc. in the product
Note that using the name same as the one of the tag set in [Device tag settings] is not
allowed.
(2) Server type
(a) Select the server type of the server computer to be accessed.
(b) When [Database server] is selected, set the following items.
(3) IP address
Enter a decimal IP address of the server computer where DB Connection Service is
installed.
(4) Port No. (Range: 1024 to 65535, Default: 5112)
Set a port number of the server computer.
Appendix 2.2 Characters that can be used for item names, component names,
Item
Database server
Application server
Table 7.44 Items set for [Database server]
Item
Data source name
Database type
*1 Set the same value in [Port No.] as the one set in [Service port] of DB Connection Service.
Section 8.5 Setting Items of DB Connection Service Setting Tool
*2 Specify the number of the port that is not being used by any database or another application.
Usually, it need not be changed.
Table 7.43 Options of [Server type]
Description
Used in [Communication action] of [Job settings].
Used in [Program execution] of [Job settings].
Description
Set the name of the ODBC data source to be accessed.
(Up to 30 characters)
For characters that can be used for data source names, refer to the
following:
Appendix 2.3 Characters available for character string
constants, etc.
Select the type of the database server.
• Oracle 8i
• Oracle 9i
• Oracle 10g/11g/12c
• SQL Server 2000/2005/2008/2012/2014/2016/2017
• MSDE 2000
• Access 2000
• Access 2003/2007/2010/2013/2016
• Wonderware Historian
*1 *2
7.9 Server Service Setting
7.9.1 Setting items in Server Service setting
1
2
3
4
5
6
7
8
7
- 55