Entering The M Series Probe Serial Number - GE Moisture Target Series 6 User Manual

3.6.7 Entering the M Series Probe Serial Number

The following procedure applies only if an M Series probe is being
Note:
used. If a VeriDri probe is used, Probe SN is not accessible.
Moisture Target Series 6 Hygrometer User's Manual
Chapter 3. Operation and Programming
To update the probe serial number, from the
Settings Menu select Cal Data and press
Enter
. The following screen appears.
To access the Cal Data menu, the User
Note:
Passcode is required (see section 3.6.1 on
page 56).
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Once the passcode has been entered,
press Enter
following appears.
To view and/or edit the probe serial number,
select Probe SN and press Enter
following screen appears.
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Once the changes have been made,
press Enter
. The screen returns to the
Cal Data menu.
a screen similar to the
. The
67