GE Moisture Target Series 6 User Manual page 60

Chapter 3. Operation and Programming
3.5.2c Setting a Field Separator
3.5.2d Setting Log Status Flags
The flags used to identify the log status are as follows:
Note:
Range Err
Over Range
Under Range
50
To designate a mark to separate the log
fields, from the Set Log Params menu select
FieldSep and press Enter
screen appears.
Use the arrow keys to select the mark used to
separate the log fields and press Enter
The screen returns to the Set Log Params
menu.
No Comm Bad Message
No Link Auto Cal
Bad CRC
To turn log status flags on or off, from the
Set Log Params menu select Flags and press
Enter
Use the arrow keys to select OFF or ON and
press Enter
Set Log Params menu.
Press Cancel
Menu.
Moisture Target Series 6 Hygrometer User's Manual
No Data
No Cal
No Refs Write Err
. The following screen appears.
. The screen returns to the
to return to the Logging
. The following
.
Read Err
ADC Failure
Cal Error