Setting Other Information; Entering The Passcode; Setting The Fault Alarm - GE Moisture Target Series 6 User Manual

Chapter 3. Operation and Programming

3.6 Setting Other Information

3.6.1 Entering the Passcode

The Settings Menu is the only menu that requires a passcode. The passcode
is a four-digit number that enables only authorized users to enter setup data.
The MTS6 prompts you to enter the passcode when you enter the Settings
Menu. See page 79 for your default passcode.

3.6.2 Setting the Fault Alarm

56
To change other settings, from the Main
Menu select Settings... and press Enter
The following screen appears.
To configure the fault alarm, from the
Settings Menu select Fault Alarm and press
Enter
. The following screen appears.
To access the Fault Alarm menu, the
Note:
User Passcode is required (see section 3.6.1
above).
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Once the passcode has been entered,
press Enter
appears.
Moisture Target Series 6 Hygrometer User's Manual
and the following screen
.